Die Casting Company « Die Casting Blog for Cast-Parts

February 26, 2010

Why Should You Use Aluminum Aircraft Parts?

Why Should You Use Aluminum Aircraft Parts? We should use aluminum in aircraft parts because it is light in weight and low in density. The aluminum is actually alloyed with other kinds of metals to make it much tougher and stronger. This is often called duralumin.

Aluminum alloys that are used in the aerospace production are very strong and have the ability to act upon well in difficult and harsh settings. The 7075 Aluminum is the best choice for alloy when it comes to mechanized aircraft parts, and 5052 aluminum, which is not really as strong but is easier to weld, is also often used. The Aluminum 7075 is perfect for extremely stressed parts and is said to be the strongest kind of aluminum. It has excellent resistance to high temperature and corrosion, which are both important features in aircraft aluminum.

The 7075 and 5052 aluminum could be altered into billets, plates, sheets, rods, tubes, bars, and coils, which are useful in the construction of aircrafts. Other substitutes to aluminum are wood, which is actually lighter in weight but weaker than aluminum. Aircraft metal should be very strong but also light in weight, and aluminum displays these necessities, which makes it the perfect selection for airplane manufacture.

Cast Parts Company produces cast parts and Die Casting Parts. Look at this website page for more details: www.cast-parts.com/diecasting_parts.html

Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

Cast Parts Company Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Comments Off

February 25, 2010

Die Casting Tooling: The Basics

Filed under: Cast Parts,Die Casting Company,Die Casting Tooling — Tags: Cast Parts, Die Cast Tooling, Die Casting Company, Die Casting Molds, Die Casting Part Prices, Die Casting Tooling — admin @ 1:43 am

Die Casting Tooling: The Basics – For starters, die casting tooling is a general term that may also be known as die casting tooling, die casting dies, insert dies, die casting molds or simply dies. The main function of die casting tooling is to serve as the holding chamber where the molten material is poured through. This ensures that the molten material actually takes the shape of its holding chamber, no matter how intricate or simple the design(s) may be. However, a good die should also afford the easiest means to actually cool down the molten material quickly and to finally remove the pieces from the holding chamber without much effort. Usually, the pieces that come from the die would need to be “trimmed” to rid of excess materials.

Although the tools behind the creation of dies from molten material have been improved dramatically by time and technology, the principles from the 1830 Elisha Root machines (the very first ones) still applies. Usually, there are two sides of die casting molds, with one part remaining stable, and the other one easily detachable so that the hardened material within can easily be popped out. These are held together while molten material is poured through an opening on one side of the die. This process can be repeated several times as long as the die remains intact or until the design of the die is still needed.

These days, the process of melting the needed alloys have become easier and faster. It is also now more economical to process larger volumes of materials that ever before. This is mainly due to the fact that machines are doing most of the “heavy lifting” – from melting ores, combining alloys, to pouring the molten material to the die, etc.

Cast Parts Company produces cast parts and Die Casting Parts. Look at this website page for more details: www.cast-parts.com/diecasting_parts.html

Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

Cast Parts Company Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Comments Off

January 30, 2010

101 Die Casting Tooling

Die Casting Tooling 101: Cavities, Mold Halves And Clamping Pressure. Die casting tooling may seem innocuous, but this is an integral part of any die casting production. Die casting tooling may also be referred to as die casting molds or die casting dies. In many instances, these are referred to simply as dies or molds. As such, there are 4 types of cavities, depending upon the pieces that are to be made and the sophistication of the machines carrying out the production. These cavities range from the singe cavity die (single, solid component); the multiple cavity die (several similar pieces can be made at the same time using on die); unit dies (dissimilar pieces are processed that usually fit into one workable component); and the combination die or combo die (where the die works with most or all of the other aforementioned functions.) Most assembly line production these days utilizes combo dies.

Die Cast Tooling Dies have two halves: the cover half which remains constant all throughout the processing stage; and the ejector half. The ejector half is not only detachable, but this also contains the spruce holes, the inlets and the runners that are necessary in the construction of very sophisticated pieces.

During processing, the machine usually locks the dies by automatic hydraulic pressure. This clamping pressure is governed by two factors namely: the pressure required for the machine to “force” the molten material within the die cavity and the total projected surface area of the pieces that are supposed to be cast. The former depends on the actual machine being used in the production (hot chamber or cold chamber). The latter depends on the measurement of the die parting line or the part where the two halves of the die actually meets.

Cast Parts Company produces cast parts and Die Casting Parts. Look at this website page for more details: www.cast-parts.com/diecasting_parts.html

Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

Cast Parts Company Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Comments Off

January 25, 2010

Zinc die casting tools industry

Filed under: Cast Parts,Die Casting Company,Die Casting Tooling — Tags: Cast Parts, Cast Zinc Parts, Die Cast Tooling, Die Casting Company, Die Casting Molds, Die Casting Tooling, Zinc Casting Parts — admin @ 1:38 am

Zinc die casting tools industry to create a large number of small to medium sized parts from metal, the best process a manufacturer can use is known as die casting. This process starts with melting the metal to be used; then the molten metal is transferred into Zinc die casting tools under high pressure to fill in every cavity of the tool. After this, the metal is then machined into dies which ultimately results in a high quality, smooth finish with good detail. And the best part is that each part is identical up to 0.2% which means that the manufacturer can opt to eliminate the need for post production machining.

Although ferrous metals can be use, the commonly used metals for die casting are non ferrous materials like zinc, aluminum, copper and tin. They are die casting using one of either two machines; the cold chambered die cast machine and the hot chambered die cast machine which is also known as the gooseneck machine. Each machine has its own distinct advantages over the other one and to determine the best one to use would depend on what metal is going to be die casting. But before they are to be died by these machines, they first need to fit into the tools.

Zinc die casting tools are made of hardened steel and they can come in single cavity tools or multiple cavity tools. They also vary in size, shape and design. Depending on the need of the manufacturer, Zinc die casting tooling can cost from several hundred dollars to several thousand dollars each.

Cast Parts Company produces cast parts and Die Casting Parts. Look at this website page for more details: www.cast-parts.com/diecasting_parts.html

Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

Cast Parts Company Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Comments Off

January 15, 2010

Aluminum Cast Parts Revolution

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company,Die Casting Tooling — Tags: Die Cast Tooling, Die Casting Part Prices, Die Casting Parts, Die Casting Tooling — admin @ 3:39 pm

Aluminum cast parts products are quietly distributed in key markets in different industries around the world. Due to the limitless possibilities for aluminum cast parts applications, a number of firms are using die cast aluminum. Today they are found everywhere. Telecommunications, consumer electronics and medical devices, automotive markets, industrial markets; these are some examples. Aluminum die cast parts are in the electronic and safety-critical applications of automobiles such as the anti-lock braking system, in micro components of mobile phones, in power tools and die cast model cars, wireless devices and their infrastructure equipment, inside electric motors, pumps, refrigeration equipment, and packaging equipment. Die cast methods are also used in the field of art to make aluminum sculptures for the garden, museum, or gallery.

Aluminum die cast parts are everywhere, but sometimes we are not aware of its presence. This is how far we have come since the first smithy and the first aluminum working activities of antiquity. Die cast parts are in factory impellers, machinery housings and fittings, and other motor components as well as in consumer products around the house that we are barely aware of like gas grill parts, toys, and kitchen appliances. Other uses for aluminum cast parts products are house accessories like furniture parts, lamps and lighting, doors and windows, safe bolts and locks, water and plumbing fixtures. Think of any finished manufactured product and sure enough it has a die cast part in it. We just didn’t know. This is the quiet revolution of the aluminum cast parts.

Cast Parts Company produces cast parts and Die Casting Parts. Look at this website page for more details: www.cast-parts.com/diecasting_parts.html

Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

Cast Parts Company Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Comments Off

« Newer Posts — Older Posts »

Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

February 26, 2010

Why Should You Use Aluminum Aircraft Parts?

February 25, 2010

Die Casting Tooling: The Basics

January 30, 2010

101 Die Casting Tooling

January 25, 2010

Zinc die casting tools industry

January 15, 2010

Aluminum Cast Parts Revolution