Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

December 16, 2015

Aircraft Parts vs. Plastic

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 10:13 am

The Advantages of Aluminum Aircraft Parts over Plastic. On comparing aluminum die cast parts with plastic parts in terms of ability to recycle:

Dilemmas concerning the plastic product’s ability to recycle came up by a nationwide task force, which called for plastics dealers abstain from using the worldwide symbol for recycling in ads, because it was considered as ambiguous in relation to plastics.

Almost all metals have constantly been readily recyclable. Die castings are never dangerous wastes and they never cause problems in management or reprocessing.

Plastic Parts:

  • Plastic is more fragile than aluminum parts.
  • Plastic is too bendable for a lot of purposes.
  • Plastic is not dimensionally firm enough.
  • Plastic does not normally perform well in warm conditions.
  • Plastic does not act well with a lot of coatings.
  • Plastic injection moldings do not obstruct radio frequency.
  • Plastic does not obstruct electromagnetic discharge.
  • Plastic injection molded parts do not provide themselves simply for chrome plating.

    • Die Cast Aluminum Parts:

  • Die Cast Parts have higher level durability under weight than plastics.
  • Die Cast Parts are totally defiant to ultra-violet rays.
  • Die Cast Parts are totally defiant to riding out.
  • Die Cast Parts are totally defiant to breaking in the incidence of diverse reagents.

    • Manufacturing phases for creating die cast parts are much quicker than for inoculation moldings.

    Die Casting Aluminum Part
    If you are looking for Die Casting Aluminum Parts, look at this website. Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    October 28, 2015

    Aluminum in Die Casting is Handy

    Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , — admin @ 10:05 am

    Aluminum in Die Casting is Handy. Casting is a manufacturing or production process wherein a liquid material is poured in a hollow mold, the cavity of which has the manufacturer’s desired shape, and after which, allowed to solidify. Once already in its solid state, the casted material is ejected from the mold. A lot of casting done is with the use of hot liquid metal or some other materials that may cold set even after it was mixed with other components like plaster, concrete, epoxy, etc.

    Furthermore, there are several processes in casting metals. Also, there are only few metals that may be cast by all of the mentioned metal casting processes. Aluminum is one of those metals. Aluminum casting process may be done through all of these processes namely, die casting, sand casting, plaster casting, permanent molding casting, continuous casting and investment casting. This is how handy aluminum can be when it comes to casting metals. When choosing what casting process will be used wherein aluminum will be used, two important factors are taken into account. The first one is the cost and feasibility factor and the second is the quality factor. Depending on the desired result and preference, the manufacturer will be able to determine which process would be best to adopt.

    Also, this process is not easily understandable to the ordinary people. Other technical terms and processes such as aluminum die casting parts prices and casting, alloy casting, mold casting, aluminum cast parts and other terminologies may not even be familiar to most materials engineers and scientists who does not have a background on metallurgical processes. People are already using a lot of cast products and they do not even have any idea how they were made or what processes were involved.

    Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Tooling look at this website.

    Follow on Twitter
    Follow Us On Twitter

    Die Casting Aluminum Part
    If you are looking for Die Casting Aluminum Parts, look at this website. Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    October 21, 2015

    Alloys Used for Aluminum Part Castings

    Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 10:56 am

    Alloys for Aluminum Part Castings. One of the mechanisms that fuel the metalworking industry and all the businesses that belong to it is the casting process, also known as the die casting process. This process has made a number of industrial innovations come to life, making it a must in today’s highly industrialized world. There are different die casting processes and, in the same way, there are a variety of materials that can be used for die casting. One of these materials is aluminum, specifically its alloys, giving way to the production of aluminum part castings and the popularity of the aluminum casting process.

    Furthermore, compared to any other alloys from or of any other base metal out there, aluminum alloys are used in the die casting process more widely or extensively. This is because of several reasons. For one, die cast parts made of aluminum are considerably lighter in weight. They also carry very high levels of tolerances when it comes to operating temperature as opposed to other die cast parts made from standard die casting alloys. Aluminum part castings are known to display noteworthy rigidity and strength, convincing die casting companies to switch from the material they are currently using to aluminum alloys. Moreover, aluminum cast parts also have good corrosion resistance, as well as commendable heat dissipation properties.

    Also, Alloys used for aluminum part castings are produced and used for a wide array of businesses, such as those that cater to automotive, medical equipment, kitchen implements, small to medium engine housings, streetlamp housings, and even aircraft hardware, to name just a few.

    die casting auto part
    If you are looking for information about Die Casting Automobile Parts, look at this website. Die Casting Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    September 16, 2015

    Analyzing Aluminum

    Filed under: Aluminum Casting Parts,Die Casting Company — Tags: , , — admin @ 10:00 am

    Analyzing Aluminum. The world needs such a wide range of products made out of aluminum that some metalworking companies concentrate their businesses solely on aluminum products. Yet even when narrowed down to this one metal, the production activities for said company can be numerous. There is the choice of assembling aluminum die cast parts, powder coating such parts, or perhaps plating them. There is the pressure testing of aluminum products, tooling, mold altering, machining, or casting. More decisions are to be made regarding the aluminum casting process, whether it should be die casting, sand casting, permanent mold casting, or plaster casting. The decision will depend on the design features of the product. Dimension, surface finish, how complex the shape, the mechanical properties and quality needed, and of course the cost factors all come into play. Finally, although a company chooses to exclusively work on aluminum part castings only, the brochure of said corporation would still be filled with hundreds of different products.

    This is because the metal aluminum has properties that make it suitable to almost all metalworking applications. Aluminum is malleable, ductile, with good heat and electric conductivity, has a high strength to weight ratio, is non corrosive, and is cheap enough to manufacture. All these qualities make aluminum the #1 metal for industrial applications. Aluminum is found in die cast parts for electronic gadgets, machines, automotive engines, rocket mechanisms, marine products; as well as in day-to-day products like toys and CPU’s. It is also cast to make kitchen utensils like skillets, pots, and pans. High wire electricity uses aluminum. It’s a good thing the metal is abundant in our earth’s crust.

    die casting tooling and die casting molds
    If you are looking for information about Die Casting Tooling and Molds, look at this website. Die Casting Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    August 19, 2015

    The Most Useful Metal–Aluminum

    Filed under: Aluminum Casting Parts,Cast Parts — Tags: , , , , — admin @ 10:24 am

    The Most Useful Metal–Aluminum. The secret of the most useful metal in the world. It is the 1st metal in terms of abundance, making up about 7-8% of the earth’s crust. Ironically, it has been hard to mine and use this metal for industrial and commercial purposes until the 1880’s and the discovery of cost efficient methods. The Romans and Greeks used it in salt form for medicinal purposes. Bars or ingots of the metal were kept alongside silver and gold and other jewels.

    Today, not a gadget, an engine, or an equipment is produced without the help of this metal. Its commercial manufacture is second only to iron. I am talking about the versatile aluminum. Lightweight, malleable and ductile, with high strength, and non corrosive properties; this metal is the darling of the industrial world. Aluminum cast parts are used in automobiles, marine engines, bikes, construction equipment, and kitchen utensils. It is also found in electrical high wires, heat coils, and watches.

    Furthermore, the process of aluminum part castings is also the process of other kinds of metal alloys such as zinc, magnesium, and iron. They are sand and die casting, permanent mold and evaporation pattern casting, composite mold and hybrid permanent mold casting, investment and plaster casting. All these methods in the aluminum casting process make this metal available and useful to all.

    There is a basic process in metal casting. It involves molten aluminum metal which is poured into a mold and left for a while to solidify. The difference lies in the kind of mold used. Die Casting Tooling.

    die casting parts
    If you are looking for Die Casting Parts, look at this website. Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    « Newer Posts — Older Posts »

    Powered by WordPress