Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

August 28, 2010

The Advantages of Aluminum Hardware Brackets over Plastic

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , , — admin @ 1:54 am

The Advantages of Aluminum Hardware Brackets over Plastic. Advantages of Aluminum Hardware Brackets over Plastic:

  • Plastic is an insulator, while aluminum is electrically conductive. Plastic will need a special coating to achieve a similar result with aluminum (albeit inferior).
  • Plastic does not ground, thus it requires extra grounding metal straps. Aluminum, being a metal, is easily grounded.
  • Aluminum has a natural shield against RF and EMI, preventing radio frequency. Plastic does not block radio frequency.
  • Aluminum hardware brackets are much stronger than plastic injection moldings.
  • Aluminum metal is stiff, while plastic injection moldings are too elastic for numerous applications.
  • Plastic molded parts do not do well for chrome plating.
  • Plastic can not obstruct electromagnetic emissions.
  • Plastic does not do well with many coatings, while aluminum brackets do better on the department.
  • Aluminum parts are stable, whereas plastic injection parts are not quite dimensionally stable.
  • Plastic molded parts do not do well in conditions of hot and humid temperatures. Aluminum hardware is more heat resistant.
  • One big problem with plastic is that they are not recyclable. Only less than 3% of the plastic will be recyclable. Nearly all metals, aluminum die castings in particular, are always readily recyclable.
  • Aluminum die castings are non-hazardous and pose no problems to the government.

If you are looking for Die Casting Parts look at this website.

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

August 20, 2010

Die Casting makes Cast Aluminum Parts for Music

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 1:51 am

Die Casting makes Cast Aluminum Parts for Music. Amplifiers were first used for electronic keyboards and bass guitars, but have since then expanded to other instruments for a full range speaker system and power level. Amplifier is required to reproduce the low frequency pitches produced by electronic keyboards and bass guitars especially at higher volumes.

The guitar amplifier chassis is produced in aluminum through die casting. Aluminum is often used are in solid states, because they are lightweight, easy to repair and less expensive. However, some guitarists prefer vacuum tube amps despite it being heavy weight and expensive. Many of them prefer vacuum tube guitar amplifiers because of the sound it makes, particularly in blues and rock music genres. Modern tube amplifiers are designed to no longer require tube biasing making it simpler for its users.

Here are some features of Guitar Amplifiers made from cast aluminum parts:

  • Dual 12AX7 tubes biased at 250 V
  • Aluminum die cast amplifier chassis through Die Casting
  • Comprehensive guitar LED indicator
  • Remote control switching
  • Unique Bass control adjusts the guitar resonant speaker response
  • Scoop control for massive tone shaping
  • Advanced Treble control for detailed guitar
  • Switcheable 20 DB nuclear gain boost response

    If you are looking for Die Casting Parts look at this website.

    Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

August 6, 2010

The Advantages of Aluminum Chassis Castings Over Steel

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 1:47 am

The Advantages of Aluminum Chassis Castings Over Steel

High pressure die casting is the process used to make aluminum die cast parts and chassis castings. This process is now becoming more and more popular in several major manufacturing industries because of its many advantages.

Aluminum is a great metal to work with. Unlike other metals, it has plenty of strengths. The metal can be found almost everywhere in the planet. Supply will not run out, so it is easy to acquire and not heavy on your pockets.

Advantages of aluminum chassis castings over steel include:

  • three times greater axial load strength
  • Faster production rate. In fact, production quantities can be done within a few days instead of several weeks!
  • Fewer failures and returns to the OEM
  • Weight is lighter by two and a half times for lesser shipping costs
  • Less finishing costs
  • Raw parts manufacturing costs are much less
  • Better looking parts

You can produce aluminum die casts according to your preference and specifications, such as the trim, clean, machine, inspect, powder coat and the package of your aluminum cast parts.

All in all, the use of aluminum castings over still helps you reduce weight, boost strength, and save you more money.

If you are looking for Die Casting Parts look at this website.

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

July 30, 2010

Examples of Aluminum Golf Products

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 1:44 am

Examples of Aluminum Golf Products. No one can deny the popularity of golf especially in the United States. There has been a significant rise in a number of golf products in the market recently. These golfing products are said to improve one’s game and reduce one’s handicap dramatically. Because of the high demand, these golf products are practically a-plenty in the market.

One example of Aluminum Golf Products is a golf ball warmer. Golf balls are heated to 105 degrees F to 115 degrees F internally, in order to achieve optimal driving distances compared to golf balls with lower or higher temperatures. These golf ball warmers are field tested extensively in order to produce the most accurate and consistent result. They help achieve an increased feel, a longer drive distance, and better golf scores.

Aluminum is undoubtedly an important metal in the world of golfing. Many Aluminum golf parts and products are sold in many golf shops and sporting stores. Heads on golf clubs are usually die cast in aluminum. Aluminum handles, aluminum knobs and aluminum brackets are used for golf pull carts. It makes use of the Cast Parts process to produce and create aluminum die casting parts for golf products and parts.

If you are looking for Die Casting Parts look at this website.

Follow on Twitter
Follow Us On Twitter

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

July 23, 2010

How are Aluminum Lighting Fixture Parts Used?

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , , — admin @ 1:42 am

How are Aluminum Lighting Fixture Parts Used? Aluminum lighting fixture parts are electrical devices mainly used for creating artificial light and illumination for homes and buildings. They are used either for indoor or outdoor lighting fixtures. Before the invention of aluminum die casting, lighting fixtures are created through welding techniques, making the system expensive and time consuming. Now, the science of aluminum die casting makes the process easier and a whole lot faster.

Aluminum lighting fixture parts usually consist of: a light source (lamp), a light reflector, an aperture (with or without lens), an outer shell or housing for alignment and protection, an electric ballast and connection to a power source. They are often used at the automotive lighting industry, marine lighting, medical lighting and aerospace lighting.

Aluminum lighting fixture parts are lightweight, durable and long lasting, making them ideal for several uses. They are often used to strengthen construction both on the inside and outside many establishments. They allow easier construction for different lighting techniques. This makes them very versatile, and can be used for many purposes: medical offices, parking garage lighting, bullet lights, street traffic lights, walk lights, outdoor coach light fixtures and high temperature light fixtures. They are also available in a wide array of shapes and sizes, ensuring better output and production of different lighting systems.

If you are looking for Die Casting Parts look at this website.

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

« Newer Posts — Older Posts »

Powered by WordPress